Think about the last time you sat in an office chair. How did it make you feel? Maybe it was a good experience, or maybe it was a bad one. Either way, office chairs can have a big impact on our mood. If you’ve ever had to cover an office chair, you know it can be a pain. There’s a lot of fabric and other materials that can be hard to wrap up and tuck in. In this comprehensive guide, we will provide you with the information you need on how to cover an office chair.
Why Should Cover an Office Chair?
There are many reasons to cover an office chair. Maybe the fabric is old and needs to be replaced. Maybe you’re trying to add some extra comfort to the chair. Or maybe you just want to change the look of the chair. Whatever the reason, it’s easy to do with a little bit of fabric and some basic sewing skills. You can even add some padding to the chair for extra comfort.
You Can Check It Out to Remove Graco High Chair Cover.
6 Easy Steps for How to Cover an Office Chair
Anyone who works at a desk knows the struggle of trying to get comfortable. Sometimes you sit for hours without moving, only to get up for a minute or two and do it all over again. Even if you can’t afford a fancy ergonomic chair, there are other ways around it. Here are some steps for how to cover an office chair so you can sit comfortably all day.
Materials and Tools:
- A piece of fabric.
- Sewing machine
- Stapler/ hemming machine
- Scissors
Step 1: Measure the Office Chair
First, measure the chair you’d like to cover. You’ll need to know the dimensions of the chair, as well as the type of fabric you’ll be using. You can do this by standing in front of the chair and measuring the height and width of the seat. You can also measure the length of the arms and the width of the back. Next, find some fabric that’s the same size as the chair.
Step 2: Cut the Fabric
After you’ve measured the chair, cut the fabric to the dimensions you measured. You can do this by cutting the fabric on the bias, which means that it’s cut on a diagonal. This will make the fabric tighter and more durable. Next, you need to unfold the fabric and cut it to the correct size, including the arms and the back. You may need to use a seam ripper or a serger to do this. Be sure to leave a 1-inch border all around the fabric so you can attach it to the chair.
Once you have the fabric cut, you’ll need to fold it in half so that the edges are even. Next, make a few small holes in the fabric at each of the measurement spots. Make sure to measure these areas again so you don’t end up with a piece that’s too big or too small.
Step 3: Seam the Material Together
Seam the material together by using a sewing machine. Start at one end of the fabric and sew to the other. Be sure to leave a 1-inch seam allowance so you can attach the fabric to the chair. You can use a straight stitch or a zigzag stitch.
Step 4: Measure Again
After you’ve sewn the material together, you’ll need to measure again. You may need to adjust the size of the material a little bit, depending on how big or small the holes are. You also need to make sure the fabric is laying flat against the chair. If it’s not, you can use a ruler to adjust the fabric until it is. You’ll also need to measure the length of the arms and the width of the back.
Step 5: Sew the Fabric Together
After you’ve measured the fabric, you’ll need to sew it together. You can do this by using a sewing machine or by hand. If you’re using a sewing machine, start at one end of the fabric and sew to the other. Be sure to leave a 1-inch seam allowance so you can attach the fabric to the chair.
Step 6: Stain and Refinish the Chair(If required)
After you’ve sewn the fabric together, you’ll need to stain and refinish the chair. You can do this by using a brush or a roller. Be sure to apply the stain evenly so that it doesn’t look blotchy. You can also use a paint sprayer if you’d like.
Tips/Suggestions:
- If you’re looking for a more comfortable sitting experience, you can add some padding to your office chair. This is easy to do, and it’s a great way to spruce up your chair without spending a lot of money. You can use any type of fabric you want, and you can even add a bit of decoration if you want.
- You can also use a decorative pillow, but be careful not to put too much pressure on the fabric.
- Always be sure to clean your office chair after finishing your work.
- There are two main types of covers, the slipcover, and the blanket cover.
- For slipcovers, you can either remove the original cover completely or just place the new one over the top of the old one.
You Can Check It Out to Adjust Office Chair Height Without Lever
Cover Specific Part of Office Chair
There are a few different ways to go about it, and the options depend on what kind of chair the cover is for. If you want to cover a specific part of the office chair, you can use a full-size sheet. Here are some ideas to get you started:
Cover the Seat
Place the fabric over the seat of the chair, making sure that the fabric is centered. Next, take the corners of the fabric and pull them tight so that the fabric is taut. Once the fabric is tight, staple it into place. Be sure to staple the fabric at least 1 inch from the edge of the chair so that it doesn’t come loose.
Cover the Back
After you’ve covered the seat, you can cover the back of the chair. Place the fabric over the back of the chair, making sure that the fabric is centered. Next, take the corners of the fabric and pull them tight so that the fabric is taut. Once the fabric is tight, staple it into place.
Cover the Armrests
After you’ve covered the seat and the back of the chair, you can cover the armrests. Place the fabric over the armrests, making sure that the fabric is centered. Next, take the corners of the fabric and pull them tight so that the fabric is taut. Once the fabric is tight, staple it into place.
You Can Check It Out to Ship Office Chair
Frequently Asked Questions
Can I Reupholster Over Existing Fabric?
You can reupholster over existing fabric, but it’s generally not recommended. The old fabric can add bulk and make it more difficult to staple the new fabric in place. It’s also difficult to match the pattern or color of the old fabric, so it’s best to start with a clean slate. If you do choose to reupholster over existing fabric, be sure to thoroughly clean and vacuum the chair first.
Can You Reupholster a Chair Without Taking It Apart?
In some cases, you might be able to reupholster a chair without taking it apart. This is usually only possible if the chair has simple upholstery, like a dining chair. If the chair has more complicated upholstery, like a wingback chair, it will be very difficult to do without taking it apart. In most cases, it’s best just to take the chair apart and start from scratch.
Conclusion
Covering an office chair can be a daunting task if you’re not used to doing it. In this article, we talked about how to cover an office chair. If you have any questions/queries regarding office chair coverings feel free to reach out to us. We would be happy to help you out.
